Drone Repair in Valencia
Hunde's Drone repair in Valencia, helps you with your FPV and commercial drones, including ESC, GPS, motor, gimbal, sensor, flight controller and crash damage.
Get an Estimate →Why Hunde?
Hunde Labs is an engineering laboratory based in Canals, Valencia. We diagnose and repair drones at the hardware and configuration level, including flight controllers, ESCs, motors, sensors, GPS, gimbals, wiring and other electronic systems.Whether you fly an FPV drone, a custom-built UAV or a commercial drone, we investigate the actual problem before recommending a repair.
What We Fix
Drone Problems We Fix
Drone Hardware
Crash damage, damaged motors, ESC, overheating, damaged ports, connectors, sensors, flight controllers and other electronic faults.
Flight Controllers
ArduPilot configuration problems, Betaflight configuration problems, flight controller faults, calibration issues and incorrect sensor readings.
GPS, Compass & Navigation
GPS warnings, compass problems, magnetometer errors, navigation sensor issues and other problems affecting positioning or orientation.
ESC & Motor
ESC errors, ESC overheating, DShot communication problems, motor damage, ESC/motor communication issues and propulsion faults.
Gimbal & Payload
Damaged gimbals, damaged ports, connectors and other hardware problems affecting cameras and drone payload systems.
Crash Damage
Did you run into a tree? or were you flying when a bird came to hunt your quad? We;ve got you covered!
Dream
Outcome
You want your drone flying reliably again — without replacing the entire aircraft because of one failed component or configuration problem.Hunde Labs diagnoses the problem, explains what we find and helps you determine whether the drone should be repaired, reconfigured or have a component replaced.
Drone Brands & Systems
Drones We Can Fix
We work with FPV drones and custom-built systems using platforms such as Betaflight, ArduPilot, PX4, and more. We can investigate problems involving flight controllers, ESCs, motors, sensors, GPS, DShot communication, wiring and configuration.
We also provide diagnostic and repair services for commercial drone systems from different manufacturers. The exact repair options depend on the drone model, component availability and nature of the fault. If you are not sure whether we can work on your drone, contact us with the brand, model and problem and we can assess it.and more…
Drone Repair process
From Drone Problem to Flight
We keep the process simple, transparent and fast so you know exactly what happens at every step.
Tell Us the Problem
Include the drone brand and model, symptoms, error messages, photos or video if available, and whether the drone has crashed. The more information, the easier it is to understand the problem before inspection.
Ship or Drop-Off
Local customers can arrange a drop-off at our laboratory in Canals, Valencia. Depending on the drone and repair, shipping may also be possible for customers elsewhere in Spain or Europe.
Diagnose & Quote
We inspect the drone and investigate the reported fault. Once we understand the problem, we explain the recommended repair and associated cost.
Repair & Test
After you approve the repair, we carry out the required work. We then test the repaired system to verify that the reported problem has been addressed.
Back in Action
Once the repair is complete, your drone is ready for collection or return. We can also explain what was repaired and any relevant configuration or maintenance considerations.
Fast Turnaround
Typically 1-3 business days from arrival*
Expert Technicians
Advanced diagnostics and micro-soldering expertise.
Quality Guaranteed
Every repair is tested and backed by our warranty.
Local & Flexible
Lab in Canals, Valencia, or on-site service.
*Turnaround time depends on parts availability and problem complexity.
common Drone Problems
Drone Repair Issues We Handle
Firmware & Configuration
Incorrect firmware, parameters or configuration can cause unexpected drone behavior, calibration problems or flight-controller errors. We can investigate configuration issues with platforms such as Betaflight, ArduPilot, and PX4 as well as related flight-controller settings.
GPS, Compass & Sensor Problems
GPS warnings, compass or magnetometer errors, accelerometer problems and other sensor faults can affect navigation, orientation and flight stability. We can investigate the sensor, wiring, calibration, configuration and related hardware to identify the cause.
ESC & Motor Problems
ESC errors, ESC overheating, DShot communication problems and damaged or malfunctioning motors can affect propulsion and flight performance. We can inspect the ESC, motor, communication system and associated wiring to determine where the problem originates.
Crash & Physical Damage
A crash can damage much more than the frame or propellers. We can inspect motors, ESCs, flight controllers, sensors, wiring, receivers, connectors and other electronic components for physical or electrical damage.
Gimbal, Ports & Electronics
Damaged gimbals, USB or communication ports, connectors and other components can prevent a drone or its payload from operating correctly. We'll assess the affected hardware and determine if a repair or component replacement is practical.
Flight & Altitude Problems
Unstable flight, incorrect altitude readings, barometer problems and other abnormal flight behavior can have multiple causes. We investigate the flight-control system, sensors, configuration and hardware to determine what is the problem.
Service Areas
Drone Repair Near Valencia
Hunde Labs is based in Canals, Valencia, and primarily serves customers in the entire Valencian Community.
Whether you’re in Valencia City, Gandia, Xàtiva, Paterna, Sagunto, Alzira, Silla, Torrent, Ontinyent, Cullera, Oliva, Xeraco, Sollana, Algemesi, Sueca, etc., you can use our mail-in service. Just pack your Drone safely:
1. Contact us for instructions & shipping label.
We'll provide everything you need.
2. No matter which town you're in valencia.
Ship it, drop it, or we can pick it up.
Need Help?
Contact us and we'll guide you through the process.
F.A.Q
Frequently asked questions about drone problems and fixes.
How much will drone repair cost?
The cost of a drone repair depends on the model, the type of damage, the components involved and the amount of diagnostic and repair work required. At Hunde Labs, our typical drone repair is approximately €70–€100, although simple repairs can cost less and complex repairs can cost significantly more.
Our pricing table provides starting prices for common repairs, including diagnostics, firmware and configuration work, motor and ESC replacement, flight-controller repairs, GPS and sensor work, gimbal repairs, port repairs and crash damage.
For example, FPV drone repairs involving components such as motors, ESCs, flight controllers or GPS modules are generally less expensive than repairs to integrated commercial drones. DJI, Autel, Skydio and Parrot drones may require more specialized disassembly, proprietary components or complete assemblies, which can increase the repair cost.
Replacement parts are quoted separately, and we will explain the expected cost before proceeding with an approved repair.
Are all replacement parts original (OEM)?
Not always. The choice depends on the specific component being replaced, the customer’s budget, and availability. Many repairs successfully use high-quality third-party parts for non-critical elements, balancing cost and performance.
Do I pay for shipping?
If you decide to ship your device to us, a shipping fee will be included in your quote. Ship and return fees are included. We’ll provide packing and address details upon quote confirmation.
What if we can’t fix it?
If a repair isn’t possible or cost-effective, we’ll inform you.
How do I pay?
We accept secure online payments, bank transfer, Bizum, cash, or even BTC. You pay after approving the quote. Let us know how you want to pay and we’ll include the instructions in the quote.
Warranty?
90-day warranty on parts/labor. Any original fault persisting will be corrected under warranty.
Do you repair legacy drones such as the DJI FPV?
Yes, we can assess legacy drones such as the DJI FPV, but parts availability can make older drone repairs more difficult.
For discontinued or older models, including older DJI, Autel, Parrot and other commercial drones, replacement motors, ESCs, flight-controller boards, gimbal components, cameras, shells and other proprietary parts may no longer be readily available.
We will first evaluate the drone and determine whether the required components can realistically be sourced. If parts are unavailable or the repair is unlikely to be economically practical, we will let you know before accepting the repair.
This approach also applies to older FPV systems where a particular flight controller, ESC, VTX, receiver or other component has been discontinued.
Can water-damaged drones be repaired?
Sometimes. Water damage does not automatically mean that a drone is beyond repair, but the chances of successful repair depend heavily on the type of liquid, how long the drone remained exposed, whether it was powered on while wet and how much corrosion has developed.
Water or moisture can damage:
- Flight controllers
- ESCs
- Motors
- GPS modules
- IMUs and other sensors
- Connectors
- Camera and gimbal electronics
- Power circuits
- Battery connections
- Mainboards
- Communication interfaces
If your drone has been exposed to water, do not power it on to see if it still works. Additional electrical damage can occur when power is applied to a wet or contaminated circuit.
Bring the drone to us for an assessment. We can inspect the affected electronics and determine whether cleaning, component replacement, board-level repair or a more extensive repair is practical.
How long does a drone repair take?
Drone repair turnaround depends on the fault, the drone model, parts availability and the complexity of the repair. Simple configuration or component repairs can often be completed faster than complex crash damage, gimbal repairs or board-level electronics work.
A typical repair process is:
Diagnostic inspection — We identify the likely cause of the problem.
Repair assessment — We determine what components or work are required.
Approval — We provide the expected repair cost before proceeding.
Repair — We carry out the approved work.
Testing — We verify that the reported problem has been addressed.
Return or collection — The repaired drone is ready for you.
We do not promise an unrealistic turnaround time before seeing the drone. If replacement parts need to be ordered, particularly for DJI, Autel, Skydio, Parrot or legacy drone models, the parts lead time can affect the total repair time.
What accessories should I send with my drone?
Only send accessories that are necessary to diagnose or reproduce the problem.
Depending on the repair, this may include:
The drone itself
The battery, if the problem involves power, startup or flight
The remote controller, if the problem involves communication or pairing
Required cables
DJI RC or other dedicated controller, when relevant
FPV radio receiver/transmitter equipment when necessary
Flight-controller configuration files
Flight logs
Relevant memory cards or storage media when the fault involves recording or system data
Do not send expensive accessories unless we specifically request them.
For a DJI Mavic, Matrice, FlyCart or similar commercial/Entreprise drone, we will let you know if the remote controller, battery, charger or other equipment is necessary for diagnosis.
For an FPV drone using Betaflight or ArduPilot, configuration backups and flight logs can sometimes be more useful than sending additional accessories.
Can someone come to fix this?
YES! We’ve got you covered. See the visit cost table here. Pricing depends upon distance from Canals.
When should I replace my drone instead of repairing it?
Repair is not always the best economic decision.
Replacement may make more sense when the drone has extensive structural and electronic damage, critical proprietary components are unavailable, or the repair cost approaches the value of a comparable replacement drone.
For example, a heavily crashed commercial drone may require a frame, gimbal, camera, motors, ESCs and main electronics. In that situation, repairing every damaged subsystem may not be economically sensible.
We can help you make that decision by assessing:
- The condition of the aircraft
- Required replacement components
- Parts availability
- Labor required
- Estimated repair cost
- Approximate value of the drone after repair
For older DJI, Autel, Skydio or Parrot models, parts availability is an especially important consideration.
Are gimbal and camera repairs DIY-friendly?
Generally, gimbal and camera repairs are more difficult than basic drone repairs and are not always suitable for DIY work.
A modern commercial drone gimbal can contain precision mechanical components, flex cables, motors, position sensors and camera electronics. A seemingly minor physical problem can therefore require calibration or replacement of an entire assembly.
This is particularly relevant to drones such as DJI Mavic, DJI Matrice, Autel and other camera-equipped commercial platforms.
If your drone has:
- A damaged gimbal
- Gimbal vibration
- A camera that does not initialize
- A stuck gimbal
- Gimbal calibration errors
- Damaged flex cables
- Camera communication errors
- Unstable image stabilization
We recommend having the system assessed before attempting to disassemble it.
Can I fix a broken drone arm or shell myself?
For a simple FPV frame, yes, replacing a damaged arm or frame component can often be a straightforward repair if you have the correct replacement parts and tools.
Commercial drones can be different.
A broken arm or shell on a DJI, Autel, Skydio or Parrot drone may involve:
- Motor wiring
- ESC connections
- Antennas
- Sensors
- Internal flex cables
- Structural alignment
- Gimbal components
- Proprietary assemblies
Improper disassembly can create additional damage or introduce alignment problems.
If the drone has suffered a crash, we recommend inspecting the complete aircraft rather than replacing only the visibly damaged shell or arm.
Do you repair FPV drones?
Yes. Hunde Labs provides FPV drone repair and diagnostics in Valencia.
We work with custom and commercially assembled FPV systems using components and platforms from manufacturers such as SpeedyBee, Matek, Holybro, BetaFPV and other FPV electronics manufacturers.
We can investigate problems involving:
- Flight controllers
- ESCs
- Motors
- DShot communication
- Betaflight configuration
- ArduPilot configuration
- GPS
- Accelerometers
- Gyroscopes
- Magnetometers
- Barometers
- Receivers
- VTX systems
- UART connections
- USB ports
- Wiring
- Power distribution
- Crash damage
- Firmware and calibration
We can also work with common FPV hardware configurations such as SpeedyBee F7 stacks, depending on the specific component and fault.
Do you repair DJI drones?
Yes. We can assess and repair different DJI drone systems, subject to the availability of replacement parts and the nature of the fault.
This can include consumer, FPV, enterprise and specialized DJI platforms such as Mavic-series drones, DJI FPV, Matrice-series aircraft and DJI FlyCart systems.
For newer or more complex DJI aircraft, such as the DJI Mavic 4, DJI Matrice 4T, Matrice 4E and DJI FlyCart 30, the repair may involve integrated electronics, gimbals, sensors, proprietary assemblies or specialized components. DJI officially identifies the Matrice 4 Series as including the Matrice 4T and Matrice 4E.
We therefore assess the specific model and fault before confirming whether a repair is practical.
Do you repair DJI Mavic drones?
Yes. We can assess DJI Mavic-series drones for problems involving physical damage, motors, sensors, GPS, gimbals, cameras, ports, electronics and other faults.
This can include newer models such as the DJI Mavic 4 as well as older Mavic generations, subject to component availability.
Older Mavic models may require additional parts sourcing because proprietary replacement components can become difficult to obtain.
Do you repair DJI Matrice drones?
Yes, we can assess DJI Matrice enterprise drones and determine whether a repair is practical.
Depending on the model, this may include systems such as the DJI Matrice 4T, Matrice 4E, Matrice 30/30T, Matrice 300 RTK, Matrice 350 RTK and other Matrice platforms, subject to parts availability and the specific fault.
Enterprise drones can contain more complex camera, thermal, GPS/RTK, gimbal and payload systems than consumer drones, so the diagnostic process may be more involved.
For example, the DJI Matrice 4T combines wide-angle, telephoto, thermal imaging, laser rangefinding and other sensing hardware, meaning a reported “camera problem” may require more detailed diagnosis than a simple lens replacement.
Do you repair DJI FlyCart drones?
We can assess DJI FlyCart systems, including the DJI FlyCart 30, depending on the fault and availability of replacement components.
Delivery drones such as the FlyCart can have different repair requirements from smaller camera drones because of their larger propulsion systems, motors, ESCs, structural components and payload systems.
DJI identifies the FlyCart 30 as a delivery drone with an eight-propeller propulsion configuration, so propulsion and structural damage should be evaluated as a complete system rather than as an isolated component.
Can you repair flight-controller problems?
Yes. Flight-controller problems can involve either hardware or configuration, and we investigate both possibilities.
Depending on the system, this may include:
- Accelerometer errors
- Gyroscope errors
- Barometer problems
- Magnetometer problems
- Sensor calibration
- Firmware problems
- Incorrect configuration
- UART issues
- USB connection problems
- DShot configuration
- GPS integration
- Power problems
- Damaged flight-controller boards
For FPV systems, this may involve Betaflight, INAV, PX4 and ArduPilot configurations and hardware from manufacturers such as SpeedyBee, Matek, Holybro and BetaFPV.
Can you repair ESC and motor problems?
Yes. We diagnose ESC and motor problems as a propulsion system, rather than automatically assuming that the failed component is the ESC or motor.
Common problems include:
- ESC errors
- ESC overheating
- Motor failure
- Damaged motor
- DShot communication problems
- Motor desynchronization
- Damaged motor wiring
- ESC power problems
- Crash-related propulsion damage
This approach is particularly important for FPV drones because a motor problem can sometimes originate from the ESC, wiring, flight-controller configuration or power system.
Can you fix GPS, compass or magnetometer problems?
Yes. We can diagnose GPS, compass and magnetometer problems on compatible drone systems.
A GPS or compass warning does not necessarily mean that the GPS or compass module itself has failed. The underlying cause can involve:
- Sensor hardware
- Wiring
- Power
- Calibration
- Configuration
- Electromagnetic interference
- Physical damage
- Flight-controller problems
We therefore investigate the complete navigation system before recommending a replacement component.
Pricing & Estimates
How much will it cost?
A full breakdown of the drone repair cost will be provided with the quote.
Local drop-off: Free by appointment at Hunde Labs in Canals, Valencia.
Shipping: From €45 depending on drone size, insurance and destination.
Parts: Replacement components are charged separately, with a 15% parts handling margin.
Diagnostics: The diagnostic fee is deducted from the repair labor when you approve the repair.
Here are some price estimates to help you determine the approximate cost:
| Drone Brand | Repair Service | Price | Shipping |
|---|---|---|---|
| DJI | Diagnostic | €50 deducted from the repair | €45 Shipping – Free to drop it off |
| DJI | Motor / Arm Repair | €70 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| DJI | ESC / Flight Controller / Electronics | €90 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| DJI | Gimbal / Camera Repair | €100 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| DJI | Advanced / Board-Level Repair | €120 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| Autel | Diagnostic | €50 + deducted from the repair | €45 Shipping – Free to drop it off |
| Autel | Motor / ESC / Electronics | €70 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| Autel | Gimbal / Camera Repair | €100 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| Autel | Advanced / Board-Level Repair | €120 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| Skydio | Diagnostic | €50 deducted from the repair | €45 Shipping – Free to drop it off |
| Skydio | Motor / ESC / Electronics | €80 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| Skydio | Camera / Gimbal / Sensor Repair | €110 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| Parrot | Diagnostic | €50 deducted from the repair | €45 Shipping – Free to drop it off |
| Parrot | Motor / ESC / Electronics | €70 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| Parrot | Camera / Gimbal / Sensor Repair | €90 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| FPV / Custom | Diagnostic | €35 deducted from the repair | €45 Shipping – Free to drop it off |
| FPV / Custom | Firmware / Configuration | €40 repair fee | €45 Shipping – Free to drop it off |
| FPV / Custom | Motor Replacement | €30 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| FPV / Custom | ESC Replacement | €45 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| FPV / Custom | Flight Controller Replacement | €50 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| FPV / Custom | GPS / Sensor Installation | €35 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| FPV / Custom | Port / Connector Repair | €50 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| FPV / Custom | Board-Level / Microsoldering | €70 repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
| FPV / Custom | Crash Damage Repair | €50+ repair fee + parts + 15% parts cost | €45 Shipping – Free to drop it off |
On-Site PC & Laptop Repair near Valencia
On-Site Drone Repair
Need Drone repair at home or at your business in Valencia?
We provide on-site drone repair across the Valencian Community,
including Canals, Xàtiva, Ontinyent, Navarrés, Alzira, Carcaixent,
Algemesí, Gandia, Cullera, Oliva, Xeraco, Tavernes de la Valldigna,
Barx and La Drova.
Our on-site repair visit fee depends on your location and covers only travel.
Repairs will be billed on top of the visit fee.
| City | Distance from Canals | Visit |
|---|---|---|
| Canals | 0 km | €25 |
| Xàtiva | ~8–9 km | €30 |
| Ontinyent | ~20–25 km | €35 |
| Navarrés | ~22 km | €35 |
| Alzira | ~29 km | €40 |
| Carcaixent | ~25–26 km | €40 |
| Algemesí | ~33 km | €40 |
| Gandia | ~48–51 km | €50 |
| Cullera | ~52 km | €50 |
| Xeraco | ~59 km | €50 |
| Tavernes de la Valldigna | ~36 km | €50 |
| La Drova | ~30 km+ | €50 |
| Barx | ~30 km+ | €50 |
| Oliva | ~53 km | €50 |
| Dénia | ~77 km | €65 |
Let's get it fixed
Get Your Drone Fixed Today
Don't buy new - repair it!
At Hunde Labs, we help your drone reach its full potential.
Request a repair estimate and we'll guide you through the rest.
Call Us:
+34 624-897-886
Email:
contact@hunde-labs.com
Visit:
By appointment in Canals
Open Mon-Sat 9AM - 9AM
We serve Valencia, Gandia, Xativa, Torrent, Ontiyent, Oliva,
Xeraco, Silla, and all towns across La Comunidad Valeciana.
Ready to get flying again?